Standard Drills

toolsStandardDrills2

General Purpose Jobber Drills (118°, 4 Facet Point)

Cutting
Diameter
Tolerance
Minimum
Tolerance
Maximum
Flute
Length
Overall
Length
Tool Number
Coated
List
Price
1/32″ -0.0003″ +0.0005″ 5/16″ 1-1/4″ P810-100180-1 $111.75
1/16″ -0.0001″ +0.0006″ 3/4″ 1-1/2″ P810-100023-1 $111.75
3/32″ -0.0001″ +0.0006″ 1″ 2″ P810-100016-1 $111.75
1/8″ +0.0001″ +0.0010″ 1-1/4″ 2-1/4″ P810-100024-1 $111.75
3/16″ +0.0003″ +0.0011″ 1-5/8″ 2-3/4″ P810-100027-1 $122.75
1/4″ +0.0006″ +0.0016″ 2″ 3-1/4″ P810-100002-1 $134.00

 

 


Standard DCC Drills are 2 flute with a 118°, 4 facet drill point and come in jobbers lengths. The diamond coating extends a minimum of one diameter from the drill tip on the jobber drills and past the counter sink on center drills. DCC drills are available as specials in sizes from 0.028″ to 0.750″. Metric sizes are available as well.

Center Drills (Only One End Coated)

Drill
Number
Drill
Size
Body
Size
Countersink
Angle
Overall
Length
Tool Number
Coated
List
Price
#00 0.025″ 1/8″ 60° 1-1/2″ P810-100200-1 $134.00
#0 1/32″ 1/8″ 60° 1-1/2″ P810-100071-1 $134.00
#1 3/64″ 1/8″ 60° 1-1/2″ P810-100072-1 $134.00
#2 5/64″ 3/16″ 60° 2″ P810-100073-1 $156.00
#3 7/64″ 1/4″ 60° 2″ P810-100074-1 $167.25
#4 1/8″ 5/16″ 60° 2-1/8″ P810-100075-1 $178.50
#5 3/16″ 7/16″ 60° 2-3/4″ P810-100240-1 $206.25